> For the complete documentation index, see [llms.txt](https://help.hazcheats.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.hazcheats.com/dma/dma-firmware/dna-id.md).

# DNA ID

{% stepper %}
{% step %}

#### Download the DNA ID Tool <a href="#download-the-dna-id-tool" id="download-the-dna-id-tool"></a>

<a href="https://mega.nz/file/kMYgTI5K#o5jhqg_ioKmrEQz-RoWUdAZDpQLmHsvlomrDw0xzmPM" class="button primary">DNA ID Tool</a>
{% endstep %}

{% step %}

### Connect Your DMA Card via JTAG

* Plug your **DMA card** into your PC.
* Connect to the **JTAG port** on the card using the included USB cable.
  {% endstep %}

{% step %}

### Install JTAG Drivers

* Once the files are downloaded, run and install the included drivers.
  {% endstep %}

{% step %}

### Run the Tool (Second PC)

* Locate the `.bat` file inside the downloaded folder that corresponds to your **specific DMA card model** (e.g., 35t, 75t, 100t, etc.).
* Double-click the `.bat` file to run it.
* Wait a few seconds for the script to complete.
  {% endstep %}

{% step %}

### Find the DNA Line

* Once the tool runs successfully, it will output a line like this:

```
DNA = XXXXX (XXXXXXXXXXXXXX)
```

{% endstep %}

{% step %}

### Send Us Your DNA

* Copy the **entire DNA ID line** and send it along with your order # in a DMA ticket.

This value is required to generate your **DNA-locked firmware**. If anything looks off or you get an error, reach out to support with a screenshot.
{% endstep %}
{% endstepper %}