DATA Driver Setup (2nd PC)
Switch your cable to the DATA port on your DMA card.
Last updated
Switch your cable to the DATA port on your DMA card.
Open Device Manager (Windows key + type Device Manager)
Look for one of these scenarios:

✅ Correct Driver (No action needed)
Device appears as: FTDI FT601 USB 3.0 Bridge Device
Located under: Universal Serial Bus devices
Status: Working properly → Skip this guide
⚠️ Missing Driver (Install now)
Device appears as: FTDI SuperSpeed-FIFO Bridge
Located under: Other devices
Status: Yellow exclamation mark → Proceed below
❌ Wrong Driver (Remove first)
Device appears as: FTDI SuperSpeed-FIFO Bridge
Located under: Universal Serial Bus devices
Action: Right-click → Uninstall device → Check 'Delete driver'
Then proceed with installation below
FTDI Driver: FTD3XX Driver v1.3.0.10
Backup Driver: FTD3XX Driver v1.3.0.8
It is now recommended to proceed with the Speed Test (2nd PC).
Last updated
